How to Order
Each item selected MUST be ordered as a separate line item. Product Notes All Clamp-on Meters include Test Leads (where applicable) and a carrying case. Temperature Measurement requires optional Probe 234901 (located under Digital Clamp-on Accessories) Product Notes
Yokogawa CL320 Clamp-on Tester, Leakage Current, 200 A
DC Clamp Meter CL320 Features
Leakage current measurement with current range from 20mA to 200A
Light weight and compact design
Manual range switching and auto power-off functions
24mm in diameter of measurable conductor
Mean value display
Auto power-off
Manual range switching
Approved for conformity to safety standards EN61010-1, EN61010-2-032(CAT. III 300 V)
Buy Directly from Instru-measure
Specifications:
| Description | Leakage Current Mini Clamp-on |
|---|---|
| Method of detection | Mean Value |
| Display | LCD (Digital display: 1999 counts) |
| Response Time | Approx. 2 seconds |
| Range Switching | Manual-range |
| Data hold | On all range |
| Operating temperature and humidity | 0 – 40°C, 85% RH or less (no condensation) |
| Influence of external magnetic field | 10 mA or less in proximity to a 14.4 mm-dia conductor carrying 100A |
| Influence of conductor position | Within 5 dgt for 0 to 50A, or 2% for 50 to 200A (10 mm-dia conductor at inside the jaw) |
| Influence of Residual Current | 10 mA or less in proximity to a 10 mm-dia conductor carrying 50A |
| Safety Standard | Conforms EN61010-1, EN61010-2-032 |
| Circuit voltage | 300 Vrms or less |
| Withstanding voltage | 3.7 kV AC for one minute |
| Power Supply | LR-44 x 2(3V) SR-44 x 2 |
| Battery Life | Approx. 15 hours (continuous) |
| Consumed current | Approx. 5 mA |
| Auto power-off | Approx. 10 minutes |
| Diameter of measurable conductor | 24 mm at maximum |
| Dimensions | Approx. 60 (W) x 149 (H) x 26 (D) mm |
| Weight | Approx. 120 g |
| Accessories | Batteries, carrying case (93033) User’s manual (IM CL320) |
Overview:
Digital Clamp Meter How to Use
Always observe instruction manual cautionary notes.
Follow maximum voltage level restrictions (up to 300V AC).
Keep transformer jaws fully closed during current measurement.
AC Current Measurement:
Set range switch.
Press jaw open/close lever and close jaws over one conductor only. The measured current value is shown on display.
