OEL Safety _ IT-IMBK _ 40 Piece-Inside-Maintenance-Box-Kit-1000V
Description:
40 Piece-Inside-Maintenance-Box-Kit-1000V
What’s included:
- IT-11258: Socket-3/8″-3/8-Drive-12-Point-Deep-1000V
- IT-11259: Socket-7/16″-3/8-Drive-12-Point-Deep-1000V
- IT-11260: Socket-1/2″-3/8-Drive-12-Point-Deep-1000V
- IT-11261: Socket-9/16″-3/8-Drive-12-Point-Deep-1000V
- IT-11262: Socket-5/8″-3/8-Drive-12-Point-Deep-1000V
- IT-11263: Socket-11/16″-3/8-Drive-12-Point-Deep-1000V
- IT-11264: Socket-3/4″-3/8-Drive-12-Point-Deep-1000V
- IT-11265: Socket-13/16″-3/8-Drive-12-Point-Deep-1000V
- IT-11805F: Extension-3″-3/8-Drive-FlareEnd-1000V
- IT-11810F: Extension-6″-3/8-Drive-FlareEnd-1000V
- IT-1269: Ratchet-7.8″-3/8-Drive-1000V
- IT-20208BB: Wrench-Box-3/8″-1000V
- IT-20209BB: Wrench-Box-7/16″-1000V
- IT-20210BB: Wrench-Box-1/2″-1000V
- IT-20211BB: Wrench-Box-9/16″-1000V
- IT-20212BB: Wrench-Box-5/8″-1000V
- IT-20213BB: Wrench-Box-11/16″-1000V
- IT-20214BB: Wrench-Box-3/4″-1000V
- IT-20215BB: Wrench-Box-13/16″-1000V
- IT-25250RA-3/8: TorqueWrench-25/250in/lbs-3/8-Drive-1000V
- IT-30802: Nut-Driver-3/16″ x 3″-1000V
- IT-30804: Nut-Driver-1/4″ x 3″-1000V
- IT-30806: Nut-Driver-5/16″ x 3″-1000V
- IT-30807: Nut-Driver-11/32″ x 3″-1000V
- IT-30808: Nut-Driver-3/8″ x 3″-1000V
- IT-30809: Nut-Driver-7/16″ x 3″-1000V
- IT-30810: Nut-Driver-1/2″ x 3″-1000V
- IT-30836: Screw-Driver-Phillips-1 x 3″-1000V
- IT-30840: Screw-Driver-Slotted-1/4″x 7″-1000V
- IT-30841: Screw-Driver-Slotted-5/16″x 6″-1000V
- IT-57325: Hex-Wrench-T-Loop-3/16-6″-1000V
- IT-57327: Hex-Wrench-T-Loop-1/4-6″-1000V
- IT-57328: Hex-Wrench-T-Loop-5/16-6″-1000V
- IT-57329: Hex-Wrench-T-Loop-3/8-6″-1000V
- IT-66-156: Screw-Driver-Phillips-2 x 4″-1000V
- IT-66-205: Screw-Driver-Slotted-3/16 x 6″-1000V
- IT-66-818: Nut-Driver-9/16 x 3″-1000V
- IT-8010: Plier-Tongue-Groove-10″-1000V
- IT-BBKCASE: 60Piece-BigBox-RollingTool-Kit-1000V-Frontier
- IT-POUCH: Tool-Pouch
- W010: 10″ SOCKET RAIL
- W3: 3/8″ CLIP FOR SOCKET RAIL
Please note, This products is not eligible for free shipping***
Additional Information
Manufactured for use in compliance with:
Meets IEC 900 Standard for Insulated Hand Tools
Exceeds ASTM 1505-01 Standards for Insulated Hand Tools
Helps meet OSHA Requirements 29 CFR Part 1910.331-335
Subpart S; 29 CFR Part 1910.269 Subpart K
Meets NFPA 70E Requirement
Tested to 10,000VAC and rated for 1,000VAC Maximum Exposure
Impact Resistant and Flame Retardant
Kit Components:
- 3/16” x 4” Slotted Screwdriver
- 1/4” x 7” Slotted Screwdriver
- 3/8″ x 8″ Slotted Screwdriver
- 1 x 3” Phillips Screwdriver
- 2 x 8” Phillips Screwdriver
- 3/8” Dr Torque Wrench 30-150 in/lb
- 3/8” Dr Ratchet
- 3/8 “ Dr Ratchet Extensions: 3”, 6”, and 12″
- 8 Pc 3/8″ Dr Deep Socket Set: 3/8″ to 13/16″
- 8 Pc Box End Wrench Set: 3/8″ to 13/16″
- 8 Pc 3″ Nut Driver Set: 3/16″ to 9/16″
- 4 Pc Hex Wrench Type “T” Set: 3/16″ to 3/8″
- 10″ Water Pump Plier
- Great Tool Organizer
Each OEL manufactured hand tool is rated for exposure up to 1000VAC and dielectrically tested at 10,000VAC.
- These tools meet or exceed ASTM F1505-01 and IEC 900 Standards for Insulated Hand Tools.
- These tools are necessary for compliance with OSHA 1910.333 (c)(2), and NFPA 70E 2004.
- The insulating material used to coat the tools is impact resistant and flame retardant.
- Two-color insulation makes inspection easier, which adds to the overall safety of the tool.
