Name: Absolute Process Instruments API 7010 G _ Frequency to DC
Brand: viseproparts.com
SKU: API 7010 G
Price: 244.66 USD
Availability: InStock

Absolute Process Instruments API 7010 G _ Frequency to DC

Features:

Precision Frequency to DC Converter
Plug In Design for Faster Installation
Full 2000 V Input/Output/Power Isolation
Input and Output LoopTracker® LEDs
Functional Test Button
Built-In Loop Power Supply for Output

Applications:

Monitor and Control Motor or Line Speed
Convert Speed and Frequency Signals
Simplify Interfacing of Frequency Sensors

The API 7010 G accepts a frequency input and provides an optically isolated DC voltage or current analog output that is linearly proportional to the input.

The full 3-way (input, output, power) isolation between input and output makes this module useful for ground loop elimination, common mode signal rejection or noise pickup reduction.

Also standard on the API 7010 G is an 18 VDC input excitation supply. If needed, this supply can be used to power a passive sensor, eliminating the need for an additional external power supply.

Common applications include frequency to DC conversions from frequency output type devices such as rotary encoders, magnetic pick-ups, variable speed drives and flow meters. The API 7010 G can also be used to convert a PLC pulse rate output to a proportional analog signal.

Output Loop Power Supply

Standard on the API 7010 G is an 20 VDC loop excitation supply. This supply can be used to power passive input devices, often eliminating the need for an additional external power supply.

LoopTracker

API exclusive features include two LoopTracker LEDs (green for input, red for output) that vary in intensity with changes in the process input and output signals. These provide a quick visual picture of your process loop at all times and can greatly aid in saving time during initial startup and/or troubleshooting.

Output Test

An API exclusive feature includes the test button to provide a fixed output (independent of the input) when held depressed. The test output level is potentiometer adjustable 100% of the output span. The output test button greatly aids in saving time during initial startup and/or troubleshooting.

Specifications Table:

Frequency Input Range	Factory configured, please specify input range Frequency: 0-25 Hz to 0-20 kHz 5 µsec minimum pulse, 100 mV minimum amplitude change
Input Amplitude Range	100 mV to 150 VRMS
Input Impedance (Voltage Input)	10 kW nominal (maximum sensitivity) 100 kW nominal (minimum sensitivity)
Input Sensitivity/Hysteresis	Single turn potentiometer for sensitivity adjustment Maximum sensitivity: ±25 mV typical Minimum sensitivity: ±2.5 V typical
Input Protection	Normal mode: 200% of input rating Common mode: 600 VDC or 600 VACp input to ground System voltages must not exceed socket voltage rating
Input Power Supply	18 VDC ±10%, unregulated, 25 mADC, max. ripple, <1.5 VP-P (may be used to power sensor)
DC Output Range	Factory configured, please specify output range. Voltage: 0-1 VDC to 0-10 VDC Bipolar voltage: ±1 VDC to ±10 VDC Current: 0-2 mADC to 0-20 mADC, 20 V compliance, 1000 Î© at 20 mA
Output Calibration	Multi-turn zero and span potentiometers (±15% of adjustment range typical)
Output Loop Power Supply	20 VDC nominal, regulated, 25 mADC, max. ripple <10 mVRMS
Output Test	Button sets output to test level when pressed (factory set to approximately 50% of span)
Output Ripple and Noise	Less than 10 mVRMS
Linearity	Better than ±0.3% of span
Response Time	70 milliseconds typical
Ambient Temperature Range and Stability	10°C to +60°C operating ambient Better than ±0.02% of span per °C stability, calculated, not tested
Isolation	2000 VRMS minimum Full isolation: power to input, power to output, input to output
Installation Environment	IP 40, requires installation in panel or enclosure Use with API 008 or API 008 FS socket Socket mounts to 35 mm DIN rail or can be surface mounted UL 508C pollution degree 2 environments or better
Power	115 VAC ±10%, 50/60 Hz, 2.5 W max.